RANGER C300 sliding gate motorization
Create my account ➜
- 230V sliding gate operator
- Gate weight up to 300kg
- For aluminum, wood, PVC, and iron gates
- 2 remote controls included
By validating your purchases, you will be debited for the amount of your order
In reservation
Discount %
or
Type of mechanism
Sliding
Compatible for portals
Aluminium, pvc, wood, iron
Power
230 V
Supply voltage
220VAC±10%/110VAC±10%
Power consumption
250 W
Amperage
--
Nominal operating thrust
1090 Nm
Maximum thrust
1100 Nm
Rotational speed of the pinion in revolutions per minute
1400
Opening / closing speed in meters per minute
12m/min
Type of mechanism
Sliding
Compatible for portals
Aluminium, pvc, wood, iron
Power
230 V
Supply voltage
220VAC±10%/110VAC±10%
Power consumption
250 W
Amperage
--
Nominal operating thrust
1090 Nm
Maximum thrust
1100 Nm
Rotational speed of the pinion in revolutions per minute
1400
Opening / closing speed in meters per minute
12m/min
Opening time for a 3m gate
15 s
Gate weight up to
300 kg
Engine rain protection
IP55
Operating temperature
-25°C to +55°C
Opening right to left
Yes
Opening left to right
Yes
Manganese limit switches
Yes
Mechanical spring limit switches
No
Gable material
Alloy
Number of sprocket teeth
16
Automatically programmable closing after opening
Yes
Manual release
Yes
Co-ownership mode
Yes
Obstacle detection
Yes
Photocell Compatible
Yes
Flashing light compatible
Yes
External battery compatible
No
Keyboard compatible
Yes
Key lock compatible
Yes
Gradual opening / closing
Yes
Adjustment of opening and closing speed
Yes
Maximum number of associable remote controls
30
Number of remote controls included
2
Number of remote control keys
4
Nylon rack included
Yes
Instructions / screws included
Yes
Infrared photocells included x2
No
LED flashing light included
No
Gross weight
7 kg
Partial pedestrian opening
Yes
Warranty
2 an(s)
Eligibility Extended warranty 5 years
No
Eligibility Extension of warranty 10 years
No
Assembly time
4 h
Recommended number of persons for assembly
2
Assembly instructions
Yes
Mounting accessories supplied
Yes
Weight of package No.1
12.8 kg
The RANGER C300 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate.
This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized.
Whether for a PVC, wood, aluminum, or iron sliding gate, this automatic system can be installed on all models weighing less than 300 kg.
Here are the main technical specifications of the motor:
Motor voltage: 230V – 250W
Input power: 220VAC±10%/110VAC±10%
Frequency: 50Hz/60Hz
Gear module: M4 Z=16 teeth
Output torque: 30.0 Nm
Nominal rotation speed: 14,000 rpm
Maximum gate weight: 300kg on level ground
Magnetic start and end stops
Environmental temperature: -25°C ~ +55°C
Protection class: IP55
Opening speed: approximately 12 meters per minute
Maximum force: 1100N
Nylon rack
Control card included with the motor.
Accessories included:
- Two 4-button remote controls with protective cover. Batteries are included.
- Nylon rack (4m – 12 pieces of 33cm)
- Installation and setup manual
- Two quick release keys in case of power outage
The motor cannot be connected to a backup battery. In the event of a power outage, manual unlocking with two keys is possible. This disengages the motor's output pinion and allows you to operate your gate freely.
The flashing light and photocells are not included.
RANGER C300 motor features:
- Opening according to your choice: left to right (factory mode) or right to left.
- Automatic closing: after opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice. - Pedestrian mode: the gate opens only partially and then closes within 0, 5, 10, or 30 seconds.
- Condominium mode: this mode allows you to reduce settings and configure up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way.
- Adjustable opening and closing sensitivity: you can adjust the opening and closing force depending on your environment.
- Manual gate unlocking. Using the provided key, you can disengage the opening of your gate and operate it manually.
- Auto-stop. The gate stops if it encounters an obstacle.
You can combine this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.
Installation Tips:
To successfully connect and configure your motor, proceed step by step and check that it's working properly between each step. If you're adding accessories to your C300 motor, check that your motor is working properly each time. Finally, make sure your electrical wiring is clean. This will help you operate your system and prevent electrical leaks.
Our Casanoov technical team is here to assist you if needed.